Posts Tagged With: axmanship

Off-Grid Firewood: Lessons from Staying Warm with an Ax

by Todd Walker

Off-Grid Firewood- Lessons from Staying Warm with an Ax - TheSurvivalSherpa.com

Imagine having only one off-grid tool to heat your home, would your family stay warm or freeze to death? Silly question, right? Only a lunatic would rely on one tool for firewood getting… especially with the antiquated ax. Call me crazy, but I chopped a full cord (128 cubic feet – 4’x4’x8′) of firewood with an ax.

Here’s why and a few things I learned in the process…

Off-Grid Firewood ~ Stay Warm with an Ax

I began Steven Edholm’s Axe Cordwood Challenge on February 7th and finished a cord of ax-cut firewood the last day of winter, March 19, 2017. I took the challenge to hone practical ax skills which were commonly known and practiced by our woodsmen, homesteader, and pioneer ancestors.

This was one of my most rewarding and satisfying journeys of self-reliance I’ve undertaken. Stacking that last stick of firewood made me pause to appreciate the journey more so than the finish line. In fact, finishing one cord actually whetted my appetite for another.

In the process of this challenge, I’ve compiled a fair amount of video footage documenting some ax skills and techniques. For those interested in video format, you can find these on our Axe Cordwood Challenge Playlist. Another resource you may find a bit of value in is our Ax-Manship Playlist.

Risk Management

The only way to improve ax-manship is to swing axes. Even with good technique and accuracy, your body is at risk from not only sharp steel, but falling timber and dead limbs being dislodged high overhead. There’s no way to insure safety 100%. You can, however, mitigate a large portion of the risk by using common sense.

Off-Grid Firewood- Lessons from Staying Warm with an Ax - TheSurvivalSherpa.com

Chopper Beware: This dead pine broke midway up during the fall. Give a wide berth when felling trees.

Even so, you have to accept the potential for injury. One tree I felled got hung up. To free it, I had to fell a smaller tree (5 inches in diameter) under great tension. Misreading the direction in which the tree would release its tension, my last chop sent the tree into my thigh. Fortunately another tree stopped the full impact. It could have much worse than a bruised muscle.

Off-Grid Firewood- Lessons from Staying Warm with an Ax - TheSurvivalSherpa.com

Not a part of the Cordwood Challenge, this dead pine hung up at the top and stump. This set up helped free the base by leveraging with a rope and 10 foot pole.

Even bent saplings as small as your wrist pose a huge danger to the wood chopper if cut without a strategy. Here’s a video link demonstrating a safe method to release stored energy.

Off-Grid Strategy

I chose to cut a cord of wood at base camp. Not because I’m more pioneering than other’s who have undertaken this challenge, it’s just that base camp is where the trees live. And firewood hides in trees.

In my off-grid setting, the greatest challenge, in my mind, was transporting large diameter logs on my shoulder over uneven terrain, vines, and ravines without a modern means of conveyance. My strategy was to fell, buck and split logs too heavy to lift for transport.

Off-Grid Firewood- Lessons from Staying Warm with an Ax - TheSurvivalSherpa.com

Red Oak logs hauled back to camp

Splitting Strategy: Wedges and Maul

To accomplish the plan with an ax only, I carved two sets of wedges (or gluts as Kephart called them in Camping and Woodcraft) from a dogwood tree to be used at each felling site. Each set contained 4 wedges – Fat Set: a steep incline plane; Skinny Set: a gradual taper with less slope. Both were useful for different tasks. I found that the fat gluts inserted into smaller splits would bounce out after a couple of blows from my wooden maul or ax poll. The fat set could be driven deep to separate stubborn logs after the skinny set opened the split wide enough to accept the fat wedges.

Off-Grid Firewood- Lessons from Staying Warm with an Ax - TheSurvivalSherpa.com

Pine halved for hauling

The skinny wedges, inserted in the initial ax split at the butt of logs, performed beautifully to further the split down the logs – even on seasoned red oak.  I found the one pine tree I cut to be the most cantankerous to halve. You’d think a soft wood would split more easily than hard. However, once halved, the pine split into rails more easily with my ax without the aid of wedges. That is, if the log was knot-free.

The dogwood wedges held up to a great amount of pounding even though they were green (non-seasoned). I had the idea to make a maul from the base of the dogwood tree which gave me the wedges. I discovered that dogwoods have a hollow space in the root ball which travels a foot or more up the trunk depending on the tree’s size. This fact makes this species unsuitable as a maul unless you cut the hollow part off. Hickory, oak, or other hardwoods have a solid root base and makes a fine maul for driving wedges.

Other DiY Tools: Chopping Platform

As my strategy dictated, after hauling logs and rails back to base camp, further splitting and cutting to length was necessary. I made a chopping platform based on the one described in Dudley Cook’s authoritative work, The Ax Book. Without a doubt, the chopping platform was the most used and multifunctional DiY tool throughout the challenge.

Initially I had planned on using it for chopping smaller rails to firewood length. It also served as a splitting and bucking platform. I experimented with bucking smaller logs (5-6 inch diameter) on the platform instead of separating them into rails first. The platform offered a solid back up for vertical ax strokes (swinging towards your feet) when bucking.

80% of the wood was split into long rails and cut to length on the chopping platform. In case you’re not aware, ax-cut wood will not stand on end for splitting. The remaining 20% was bucked to length on the platform, tossed on the ground, and split using the Tiger technique (video link).  This method worked well on all clear grained wood. When knots were present, I learned quickly to lay the round on the chopping platform to split.

Make Every Stroke Count

The first human I witnessed felling a tree with an ax was Mama. With that moment etched in my five-year-old mind, I was hooked on axes.

Technique

The ax swing is a basic physical movement. However, proper technique employed efficiently saves energy and time. A tinderfoot, unfamiliar with technique, gnaws into a tree with a flurry of misdirected chops and slashes until the tree submits or he gives up. The wood chips produced are as fine as flower bed mulch.

The super computer in our skull coordinates with our muscles to strike where our eyes look. I’m not saying that you don’t need repetition to develop muscle memory. You certainly do. Practice makes permanent… not perfect.

Every stroke is made under control. Muscle up on swings and accuracy suffers. Use your natural swing and let the tool do its share of the work. When felling, the least practiced skill due to the low number of trees needed to produce a cord of wood, a pattern of overlapping strikes is followed for both the face and back notch. A small notch is created as the base for larger notches. With the small notch complete, large wood chips are freed more easily as you progress. A slight twist of the ax after each stroke helps to loosen and remove chips on the top and bottom cuts of the notch. Repeat this blueprint until you near the center of the tree. Do the same 45 degree notching technique on the back cut.

Aim and Accuracy

My ax placement dramatically improved over the course of this challenge. Cleaner notches in felling and bucking were evident with more purposeful practice. One tip I’d offer in bucking is to swing the ax through a line vertical with your nose as your eyes focus on the target.

As my accuracy grew, I concentrated on cocking the ax handle back with my wrist at the peak of my backswing before the downward stroke. This seemed to increase velocity of the ax head. Accuracy and velocity equates to more work done with less effort.

Trading Theory for Action

Early in my teaching career, I was the sage on the stage dishing out book information and theory. As I grow gray, I’ve come to realize that lessons last when students are given the opportunity to learn by doing the stuff. Building knowledge through experience makes math relevant in the real-world. This is even more true with ax-manship and self-reliance skills.

Remove electricity and the combustion engine from the firewood equation and suddenly the ax becomes relevant. Modern tools, which I own, can get the job done more quickly. But I needed to experience, in context, what it takes to cut a cord with an ax only.

By Doing the Stuff, opportunities and learning took place…

  • Emergent skills were honed
  • Unpredictable situations improved learning
  • Reflected on consequences, mistakes, and successes
  • Improved woodland management
  • I could indeed keep my family warm with an ax

In full disclosure, a bucksaw was used for one back cut on the last tree felled. My buddy, Kevin, came out for about an hour and cut the face notch. A large wild azalea, which I refuse to cut, prevented safe ax work on the back cut. This was the only time a tool other than an ax was used.

Keep Doing the Stuff of Self-Reliance

Todd

P.S. – You can also keep up with the Stuff we’re Doing on TwitterPinterestGoogle +, YouTube, Instagram, and Facebook… and over at our Doing the Stuff Network.

P.P.S – If you find value in our blog, Dirt Road Girl and I would appreciate your vote on Top Prepper Sites! You can vote daily by clicking here or on the image below. Check out all the other value-adding sites while you’re there…

Thanks for Sharing the Stuff!

Copyright © by Survival Sherpa: In light of the recent theft of all my content by a pirate site, my sharing policy has changed. I do not permit the re-posting of entire articles from my site without express written consent by me. My content on this site may be shared in digital form (200 words or less) for non-commercial use with a link back (without no-follow attribute) to the original article crediting the author. All photos, drawings, and articles are copyrighted by and the property of Survival Sherpa. You are more than welcome to share our photos and articles on social media for educational purposes as long as you link back to the original article/photo with credit to the author.

Categories: Bushcraft, Camping, Doing the Stuff, Homesteading, Self-reliance | Tags: , , , | 8 Comments

2 Ax Techniques for Fast Firewood Splitting

by Todd Walker

2 Ax Techniques for Fast Firewood Splitting ~ TheSurvivalSherpa.com

The permanent scars on my parent’s car port floor are a reminder of that grand idea Craig and I came up with while splitting firewood in 1977. The winter wind felt like we were tied to a whipping post.

“Let’s get out of the wind.”

“How ’bout the car port? The wood’s gotta be stacked in there anyway.”

Not our best idea ever, but we set up shop on the two-year old concrete floor. Driving the metal wedge with 8-pound sledge hammers, a few, quite a few actually, shot like bullets through the wooden rounds followed by a distinctive twang of metal meeting concrete.

“Ya think he’ll notice?”

“Nah. It’s just a few dimples. And we’ll stack wood on top anyway.” Upon further inspection, they were chunks, not dimples.

Had we known of these two splitting techniques, we could have saved Daddy’s new floor… and a lot trouble when he got home from work.

The Twist Technique

The normal way to turn big rounds of wood into little stuff is to use a splitting maul or hammer and steel wedge. These tools are heavier than an ax and doesn’t mind eating grit, even an occasional rock under ground. But they’re heavy fellows and not convenient to tote to base camp. A proper ax is easier to carry and does a noble job of separating wood rounds.

There are many frustrating ways to split wood. Typically, one balances a round atop a chopping block, takes aim, swings, and one becomes two pieces. And neither piece stays on the platform for further splitting. The cycle of bending over, balancing a half-round atop the chopping block, and splitting again is about as fun as a pulling teeth. Even using an old tire to hold the stick together while splitting requires lifting and placing the wood inside the tire.

If you want to speed up the splitting process, put a twist on your swing.

Stance, Swing, and Safety

Trees, like people, are different yet have similarities. No matter the wood species, when possible to determine, split rounds from top to bottom. That is, position the wood vertically as it grew in the forest, top end up, bottom (butt) down.

Longer axes are safer than short-handled ones. When splitting, even on a chopping block (backed-up vertical stroke), with a boys ax (24 to 28 inch length), if you miss the target and chopping block all together, your follow through will likely turn your foot into a clove hoof. A 36 inch or longer handled ax extends the swing arc and would stop in the ground on miss hits.

With that in mind, and the fact that we’re not using a chopping block, we’re actually splitting what would traditionally be used as a chopping block – a big, round chunk resting on the ground. A slight twist or flick of the handle at the moment the ax meets the wood will prevent the ax from traveling through the length of wood.

To start, target the outside edge of the round. For my swing, I aim about 3 inches in on the outside edge of the chunk. My right hand grips the bottom of the handle and flicks or twists to the right on impact. You’ll be moving around the chuck steadily removing wood so make sure your area is clear of all tripping hazards and swing obstructions.

Clear, straight-grained wood like the Red Oak in the video makes for fine splitting… until you hit a knot. At that point, the twist technique is not effective. Other tree species can be difficult to split even with a splitting maul. Sweet Gum, for instance, reveals a mangled, interlocking grain which frustrates the most seasoned wood splitter. The best strategy to get through knots with an ax is to strike dead center on the knot. Or, just designate the piece a long-burner.

The Tiger Technique

Steven Edholm, who issued his crazy Axe Cordwood Challenge, along with my fellow participants have tried to come up with a name for this splitting method. Nothing official has stuck. What I’m calling this golf-like-swing is the Tiger. You may have figured out by now I’m referring to Tiger Woods, professional golfer.

Whatever you choose to call it, the Tiger is my favorite and fastest method for turning a pile of large rounds into small, burnable chunks. Before the Safety Sally brigade shuts me down for even suggesting you use what appears to be a dangerous ax swing, allow me to explain the method behind what seems to be pure madness.

Safety Concerns 

I covered the basics of swinging an ax inside and outside your frontal zone in a previous article. There are inherit dangers anytime you swing 3 and a half pounds of scary-sharp steel. I get it. No matter how many times I grip my ax, my mind pictures a few online ax injuries, which can’t be unseen, as I soberly begin swinging. Even then I must follow, without exception, the protocol of safe ax use.

A few concerns always pop up from Safety Sally folks who have never attempted the Tiger. It just looks awfully dangerous. Here’s the gist of their advice/concern…

  • A glancing blow and the ax hits your leg. Don’t split that way.
  • The log should be propped up against another back rest.
  • Looks like an accident waiting to happen – especially with a double bit ax.
  • That’s a hazardous way of splitting wood. I’ve chopped and split wood growing up. Never chopped that way.

What’s interesting is that other seasoned axmen comment on the effectiveness of this method. This is a lateral swing and is preformed outside the frontal zone. The important part is to keep your feet ahead of the point of ax impact. Clear-grained wood separates with alarming speed… and will fly many feet in the wood lot.

When clearing and area for ax work, I use this same swing to remove small saplings close to the ground. As the ax arc begins its upward motion, the bit separates the sapling cleanly. Again, follow the Frontal Zone rules for safe swinging.

Just like any other ax technique, Doing the Stuff is the key to improvement. You can’t watch the video or read about it to become proficient. Study proper technique and go split some wood.

Here’s a few photos of my firewood stack at base camp. The Axe Cordwood Challenge is coming along nicely and teaching me some valuable lessons on the journey.

2 Ax Techniques for Fast Firewood Splitting ~ TheSurvivalSherpa.com

The front stack is all ax cut: felling, bucking, splitting, and cutting to length. The Red Oak in the rear was sawn and doesn’t count in my Cordwood Challenge.

2 Ax Techniques for Fast Firewood Splitting ~ TheSurvivalSherpa.com

Red Oak and Tulip Poplar stacked. You can see the difference between the sawn firewood and ax-cut wood.

Keep Doing the Stuff of Self-Reliance,

Todd

P.S. – You can also keep up with the Stuff we’re Doing on TwitterPinterestGoogle +, YouTube, Instagram, and Facebook… and over at our Doing the Stuff Network.

P.P.S – If you find value in our blog, Dirt Road Girl and I would appreciate your vote on Top Prepper Sites! You can vote daily by clicking here or on the image below. Check out all the other value-adding sites while you’re there…

Thanks for Sharing the Stuff!

Copyright © by Survival Sherpa: In light of the recent theft of all my content by a pirate site, my sharing policy has changed. I do not permit the re-posting of entire articles from my site without express written consent by me. My content on this site may be shared in digital form (200 words or less) for non-commercial use with a link back (without no-follow attribute) to the original article crediting the author. All photos, drawings, and articles are copyrighted by and the property of Survival Sherpa. You are more than welcome to share our photos and articles on social media for educational purposes as long as you link back to the original article/photo with credit to the author.

Categories: Bushcraft, Camping, Functional Fitness, Homesteading, Lost Skills, Self-reliance | Tags: , , , , | 4 Comments

Ax Chopping Platform: Speed Up Firewood Cutting Safely

by Todd Walker

ax-chopping-platform-speed-up-firewood-cutting-safely-thesurvivalsherpa-com

On a modern homestead wood lot, one cranks a chain saw, cuts logs to the length, and splits the rounds to season. The motorized saw makes quick work of large and small wood. But in an operational base camp, lugging a chainsaw, bar oil and fuel, on a regular basis is not practical. A good ax weighs less but can get the job done. However, there are challenges to cutting firewood (not splitting) to length with an ax.

Here’s a simple solution which not only saves your ax bit from grit and rocks in the ground, but allows you to use a powerful vertical chopping stroke safely – described in our last ax work article. To cut a winter supply of firewood with an ax only, take the time to build this speedy chopping platform.

The Ax Chopping Platform

Adapted from The Ax Book (D. Cook)

Here’s what you’ll need to build your own…

  • 2 Base Logs – six to seven-foot hardwood logs about 10-12 inches diameter
  • Stop Stick – 5 inches diameter by one foot
  • Sturdy, heavy gauge wire
  • Ax, of course
  • Saw – chainsaw will speed up your project
  • Pliers for twisting and cutting wire
  • Hardware – 4 nails, 3 feet of cable or chain
  • 5 pound weight

Step 1: Cut Base Logs

For axmen, chop down a hardwood tree with your felling ax. Buck it twice to get two 7 foot lengths. Or crank your chainsaw for the task. Either way works.

The Authentic Lumber Sexual Guide to Ax Work ~ TheSurvivalSherpa.com

The opposite, or back cut separates the log

I chose a half-broken Sweet Gum (Liquidambar styraciflua). City folk hate them in their yards due to their pesky, prickly fruit, a scourge on bare feet and medieval projectiles when mowed. Trash trees in the view of many. But very resilient.

Now for the fun part… getting them back to camp. My good friend, Cokey, pork-butt-smoker extraordinaire, speaking in full southern drawl, always has this to say about any hard work,

“It’s like haulin’ logs. Ya gotta really wanna do it.”

Ax Chopping Platform: Speed Up Firewood Cutting Safely ~ TheSurvivalSherpa.com

This size log would normally be split lengthwise, then quartered to haul back to camp.

And I did. I flopped and rolled my two sticks, dodging trees and obstacles, back to camp. My peavy was a fine companion to have along the journey.

Step 2: Secure Base Logs

For the sake of clarity, the end of the platform where the chopping happens we’ll call the “Head“. The opposite end of the platform will be, you guessed it, the “Tail.

Position the two logs side-by-side so the fat end of one mates up with the skinny end of the other. This will form the trough to hold the long wood you plan to chop into smaller wood. It’s a good idea to lay two length of cedar, or other rot resistant wood, perpendicular at the ends of the logs to keep them off the ground. This also makes the wiring job you’re about to do much easier, i.e. – passing wire under two real heavy logs.

Your choice in wire matters. In my video, the electric fence wire couldn’t stand the pressure. I cut lengths of rusty, but still strong enough, barbed wire from a fallen hog wire fence line near base camp. Be resourceful.

Wrap the wire around the Head of the platform and twist tight with pliers. You could also use a stout stick as a windlass. Beat the exposed barbs down if you use wire in the barbed variety.

Mr. Cook illustrates three wooden dowels driven through the two logs horizontally. If you’re building this project at your homestead, that may be feasible. Or, just drill and run all-thread rods through and secure with nuts and bolts. In the woods, I used the simple method, wire.

Step 3: Secure the Stop Stick

Butt the stop stick against the newly installed wire crossing the trough. Twist it down until taut. Too much twisting and you’ll sheer the wire and have to start over. Fencing pliers come in handy but other pliers work. Another option would be to use a Spanish windlass to tighten the wires. Ted, a member of our Doing the Stuff Network, pointed me to the Cobb & Co Hitch method.

Ax Chopping Platform: Speed Up Firewood Cutting Safely ~ TheSurvivalSherpa.com

Stop Stick secured with front kickback guard installed

Step 4: Attach Front Kickback Guard

If you’ve ever had a wooden missile fly at your face while chopping through a horizontal stick, you’ll appreciate the importance of this step. A whole lot of pain accompanies a stick in the eye. To prevent this stick-to-the-face event, install a piece of domed wire 6 to 8 inches past the stop stick.

I cut a section of that old hog wire long enough to arch over the platform creating a two-square wide hood of sorts. It hugs the top of the stop stick with about 6 inches overhanging the platform logs. I used two 16d nails and washers to secure the four ends to the sides of the platform logs. This gives me enough room to chop firewood lengths while safeguarding my noggin from flying firewood.

Step 5: Install Rear Kickback Guard

As experienced wood lot choppers know, as the stick you’re chopping to size shortens, especially the final two short lengths, the butt end is free to fly, and often does. Another kickback guard will hold the last length in the trough. However, this rear guard can’t be secured permanently over the trough or the stock your chopping won’t rest flat between the platform logs.

Ax Chopping Platform: Speed Up Firewood Cutting Safely ~ TheSurvivalSherpa.com

A wired rock works for an improvised backcountry weight

Screw or nail a section of chain or wire to the chopping side of the platform with a weight attached to the end of the chain. This will allow you to toss the restrain over the stock in the trough as it shortens.

The distance between the front and rear kickback guards depends on the length of firewood you need. For instance, at base camp, 18 to 20 inches is about right. Mark the trough at your desired length. From that mark, attach the rear guard about the same distance as the front guard towards the Tail end of the platform.

On a homestead, any metal 5 pound weight can be located to hold the rear guard in place. In the forest, not so much. I stole a jagged-edged rock from my fire pit, wrapped it with wire, and attached it to the end of my chain restraint. When engaged (flopped over the logs), the weight rests about midway down the opposite side of the platform.

Step 6: Wire and Notch the Tail

To wire the Tail, cut a 90 degree notch in the end of both logs. The depth of the vertical cut should be slightly past the depth of the trough. Now cut horizontally to meet the vertical cut and remove the notch and create a ledge. Wrap wire around the log ledge and twist taut. If you run the wire tight in the corner, you’ll have a small, horizontal “table top” to sit your hot cocoa while sitting on the platform around the campfire. Flat horizontal surfaces are a luxury at base camp.

Ax Chopping Platform: Speed Up Firewood Cutting Safely ~ TheSurvivalSherpa.com

A view of the wired Tail end of the platform

Step 7: Get to Chopping

Green wood is easier to chop than seasoned. Both are easier to separate when chopped at a 45 degree angle to the grain. Feed your stock into the trough up to the stop stick. Position yourself at a 45 degree angle where you can make a full vertical, backed-up stroke in the trough on your marked chopping spot. The stock is easily separated with a single, well placed stroke. On thicker stock that doesn’t, rotate the stick in the trough and chop it once more. That ought to do it.

Remember to “engage” the rear guard as the butt end of the stock shortens and gets itchy to jump off the platform.

The Axe Cordwood Challenge

In our Ax Chopping Platform video, I mentioned Steven Edholm’s “Axe Cordwood Challenge” on his YouTube channel, Skill Cult. Some may be wondering, why in the world would a person chop a cord of firewood, a stack measuring 4’x4’x8′, with an ax only?! They’re still manufacturing chainsaws, ya know! They do indeed. I own a couple of these modern marvels.

But, the ax, a simple machine, unlike the chainsaw, requires minimal field maintenance. Granted, the chainsaw cuts firewood to length quicker than an ax. To accommodate modern cutting, you’ll need to haul the gas-oil-mix can, bar/chain oil, an extra bar and chain for saws stuck in a log, and other field maintenance tools. You’ll probably carry an ax alongside the motor saw as a backup anyway. But with modern means of travel, four-wheelers and trucks, that’s not a huge deal.

Here’s the thing, for me at least…

In my mind, more significant is the fact that ax-manship is an old-soul skill which few moderns wish to re-kindle, never seeing the possibility of a future dependent on axes to stay warm. It is neither convenient nor easy. However, ax work is my most personally rewarding, satisfying, and warming undertaking I’ve done over the years.

You find an axman, one who turns a tree into firewood by felling, limbing, bucking, splitting lenght-wise for hauling, and then, chopping wood to length, and he’ll confirm that the most challenging job of staying warm with his ax is chopping to final burning size. This chopping platform greatly increases the speed, safety, and efficiency of making long logs short.

So, Steven, I’m taking you up on your challenge. Updates will be posted on my progress. If nothing else, I’ll be in great shape from swinging steel and hauling logs.

Keep Doing the Stuff of Self-Reliance,

Todd

P.S. – You can also keep up with the Stuff we’re Doing on TwitterPinterestGoogle +, YouTube, Instagram, and Facebook… and over at our Doing the Stuff Network.

P.P.S – If you find value in our blog, Dirt Road Girl and I would appreciate your vote on Top Prepper Sites! You can vote daily by clicking here or on the image below. Check out all the other value-adding sites while you’re there…

Thanks for Sharing the Stuff!

Copyright © by Survival Sherpa: In light of the recent theft of all my content by a pirate site, my sharing policy has changed. I do not permit the re-posting of entire articles from my site without express written consent by me. My content on this site may be shared in digital form (200 words or less) for non-commercial use with a link back (without no-follow attribute) to the original article crediting the author. All photos, drawings, and articles are copyrighted by and the property of Survival Sherpa. You are more than welcome to share our photos and articles on social media for educational purposes as long as you link back to the original article/photo with credit to the author.

Categories: Bushcraft, Camping, Doing the Stuff, Homesteading, Lost Skills, Self-reliance | Tags: , , , , | 12 Comments

Blog at WordPress.com.

%d bloggers like this: