by Todd Walker
Imagine having only one off-grid tool to heat your home, would your family stay warm or freeze to death? Silly question, right? Only a lunatic would rely on one tool for firewood getting… especially with the antiquated ax. Call me crazy, but I chopped a full cord (128 cubic feet – 4’x4’x8′) of firewood with an ax.
Here’s why and a few things I learned in the process…
Off-Grid Firewood ~ Stay Warm with an Ax
I began Steven Edholm’s Axe Cordwood Challenge on February 7th and finished a cord of ax-cut firewood the last day of winter, March 19, 2017. I took the challenge to hone practical ax skills which were commonly known and practiced by our woodsmen, homesteader, and pioneer ancestors.
This was one of my most rewarding and satisfying journeys of self-reliance I’ve undertaken. Stacking that last stick of firewood made me pause to appreciate the journey more so than the finish line. In fact, finishing one cord actually whetted my appetite for another.
In the process of this challenge, I’ve compiled a fair amount of video footage documenting some ax skills and techniques. For those interested in video format, you can find these on our Axe Cordwood Challenge Playlist. Another resource you may find a bit of value in is our Ax-Manship Playlist.
The only way to improve ax-manship is to swing axes. Even with good technique and accuracy, your body is at risk from not only sharp steel, but falling timber and dead limbs being dislodged high overhead. There’s no way to insure safety 100%. You can, however, mitigate a large portion of the risk by using common sense.
Even so, you have to accept the potential for injury. One tree I felled got hung up. To free it, I had to fell a smaller tree (5 inches in diameter) under great tension. Misreading the direction in which the tree would release its tension, my last chop sent the tree into my thigh. Fortunately another tree stopped the full impact. It could have much worse than a bruised muscle.
Even bent saplings as small as your wrist pose a huge danger to the wood chopper if cut without a strategy. Here’s a video link demonstrating a safe method to release stored energy.
I chose to cut a cord of wood at base camp. Not because I’m more pioneering than other’s who have undertaken this challenge, it’s just that base camp is where the trees live. And firewood hides in trees.
In my off-grid setting, the greatest challenge, in my mind, was transporting large diameter logs on my shoulder over uneven terrain, vines, and ravines without a modern means of conveyance. My strategy was to fell, buck and split logs too heavy to lift for transport.
Splitting Strategy: Wedges and Maul
To accomplish the plan with an ax only, I carved two sets of wedges (or gluts as Kephart called them in Camping and Woodcraft) from a dogwood tree to be used at each felling site. Each set contained 4 wedges – Fat Set: a steep incline plane; Skinny Set: a gradual taper with less slope. Both were useful for different tasks. I found that the fat gluts inserted into smaller splits would bounce out after a couple of blows from my wooden maul or ax poll. The fat set could be driven deep to separate stubborn logs after the skinny set opened the split wide enough to accept the fat wedges.
The skinny wedges, inserted in the initial ax split at the butt of logs, performed beautifully to further the split down the logs – even on seasoned red oak. I found the one pine tree I cut to be the most cantankerous to halve. You’d think a soft wood would split more easily than hard. However, once halved, the pine split into rails more easily with my ax without the aid of wedges. That is, if the log was knot-free.
The dogwood wedges held up to a great amount of pounding even though they were green (non-seasoned). I had the idea to make a maul from the base of the dogwood tree which gave me the wedges. I discovered that dogwoods have a hollow space in the root ball which travels a foot or more up the trunk depending on the tree’s size. This fact makes this species unsuitable as a maul unless you cut the hollow part off. Hickory, oak, or other hardwoods have a solid root base and makes a fine maul for driving wedges.
Other DiY Tools: Chopping Platform
As my strategy dictated, after hauling logs and rails back to base camp, further splitting and cutting to length was necessary. I made a chopping platform based on the one described in Dudley Cook’s authoritative work, The Ax Book. Without a doubt, the chopping platform was the most used and multifunctional DiY tool throughout the challenge.
Initially I had planned on using it for chopping smaller rails to firewood length. It also served as a splitting and bucking platform. I experimented with bucking smaller logs (5-6 inch diameter) on the platform instead of separating them into rails first. The platform offered a solid back up for vertical ax strokes (swinging towards your feet) when bucking.
80% of the wood was split into long rails and cut to length on the chopping platform. In case you’re not aware, ax-cut wood will not stand on end for splitting. The remaining 20% was bucked to length on the platform, tossed on the ground, and split using the Tiger technique (video link). This method worked well on all clear grained wood. When knots were present, I learned quickly to lay the round on the chopping platform to split.
Make Every Stroke Count
The first human I witnessed felling a tree with an ax was Mama. With that moment etched in my five-year-old mind, I was hooked on axes.
The ax swing is a basic physical movement. However, proper technique employed efficiently saves energy and time. A tinderfoot, unfamiliar with technique, gnaws into a tree with a flurry of misdirected chops and slashes until the tree submits or he gives up. The wood chips produced are as fine as flower bed mulch.
The super computer in our skull coordinates with our muscles to strike where our eyes look. I’m not saying that you don’t need repetition to develop muscle memory. You certainly do. Practice makes permanent… not perfect.
Every stroke is made under control. Muscle up on swings and accuracy suffers. Use your natural swing and let the tool do its share of the work. When felling, the least practiced skill due to the low number of trees needed to produce a cord of wood, a pattern of overlapping strikes is followed for both the face and back notch. A small notch is created as the base for larger notches. With the small notch complete, large wood chips are freed more easily as you progress. A slight twist of the ax after each stroke helps to loosen and remove chips on the top and bottom cuts of the notch. Repeat this blueprint until you near the center of the tree. Do the same 45 degree notching technique on the back cut.
Aim and Accuracy
My ax placement dramatically improved over the course of this challenge. Cleaner notches in felling and bucking were evident with more purposeful practice. One tip I’d offer in bucking is to swing the ax through a line vertical with your nose as your eyes focus on the target.
As my accuracy grew, I concentrated on cocking the ax handle back with my wrist at the peak of my backswing before the downward stroke. This seemed to increase velocity of the ax head. Accuracy and velocity equates to more work done with less effort.
Trading Theory for Action
Early in my teaching career, I was the sage on the stage dishing out book information and theory. As I grow gray, I’ve come to realize that lessons last when students are given the opportunity to learn by doing the stuff. Building knowledge through experience makes math relevant in the real-world. This is even more true with ax-manship and self-reliance skills.
Remove electricity and the combustion engine from the firewood equation and suddenly the ax becomes relevant. Modern tools, which I own, can get the job done more quickly. But I needed to experience, in context, what it takes to cut a cord with an ax only.
By Doing the Stuff, opportunities and learning took place…
- Emergent skills were honed
- Unpredictable situations improved learning
- Reflected on consequences, mistakes, and successes
- Improved woodland management
- I could indeed keep my family warm with an ax
In full disclosure, a bucksaw was used for one back cut on the last tree felled. My buddy, Kevin, came out for about an hour and cut the face notch. A large wild azalea, which I refuse to cut, prevented safe ax work on the back cut. This was the only time a tool other than an ax was used.
Keep Doing the Stuff of Self-Reliance
P.P.S – If you find value in our blog, Dirt Road Girl and I would appreciate your vote on Top Prepper Sites! You can vote daily by clicking here or on the image below. Check out all the other value-adding sites while you’re there…
Thanks for Sharing the Stuff!
Copyright © by Survival Sherpa: In light of the recent theft of all my content by a pirate site, my sharing policy has changed. I do not permit the re-posting of entire articles from my site without express written consent by me. My content on this site may be shared in digital form (200 words or less) for non-commercial use with a link back (without no-follow attribute) to the original article crediting the author. All photos, drawings, and articles are copyrighted by and the property of Survival Sherpa. You are more than welcome to share our photos and articles on social media for educational purposes as long as you link back to the original article/photo with credit to the author.