Posts Tagged With: alcohol stove

How to Make a Plumber’s Stove on Steroids for Cooking and Warmth

by Todd Walker

How to Make a Plumber's Stove on Steriods

Being the son of a plumber, I’ve witnessed many inventive ways to stay warm while working on cold steel in frigid winters atop a 700 foot tall powerhouse. From modern acetylene torches to alcohol stoves, plumbers get creative when it comes to heat sources.

Before the time of pressurized gasoline blow torches, alcohol was used as fuel for melting lead and soldering. However, at some point in history, before the modern thermos came about, a smart plumber poured cold coffee from his makeshift milk bottle thermos and slurped cold soup from his lunch pail. This was his ah-ha moment! Hummmm, just add some alcohol to a container stuffed with cotton rags and set it on fire! And the plumber’s stove was born. At least that’s the story I heard told.

I built a pint-sized plumber’s stove 7 or 8 years ago. It’s a lightweight, self-contained, and portable stove for backpackers (ultra-lighters excluded) and campers. I last used it 5 years ago. Upon re-opening, the denatured alcohol lit up with no problem. I didn’t like the fact that I had to loosen the hose clamp and slide the pot holder down to remove the paint lid. A small annoyance really.

Joshua Shuttlesworth, a fellow self-reliance blogger and Pathfinder brother, happened to post his brilliant version… a larger DIY Hobo Stove, as he dubbed it. He used a gallon paint can and a #3 size can (45 ounces). He has a fancy can opener that removes the can lid in a way that you can seal the can with the lid after it’s been removed. Wish I had one… but I don’t.

But I did have an empty quart paint can nesting in a gallon paint can I’d planned to use for another project. This larger version would feed and heat a whole crew of hungry plumbers!

Check out our video at the bottom of this post to see the Plumber’s Stove on steroids in action.

Here’s how to make your own…

Gather the Stuff


  1. One gallon metal paint can – box stores sell new empty cans or you could clean an old can
  2. One quart metal paint can – same as #1
  3. Platform for quart can inside the gallon can – explained in Step #3
  4. Roll of toilet paper (cotton balls or 100% cotton material works too)
  5. Bottle of isopropyl alcohol or denatured alcohol
  6. Pathfinder Bush Pot Nesting Stove – not required but if you already own one, it fits perfectly in the grooved lip of gallon paint cans

Assemble the Stuff

This is the easy part.

Step 1: Stuff the Can

Remove the cardboard tube from the toilet paper roll. Grip the edge and pull the tube out of the center. Smashing the roll a couple of times seems to loosen the tube enough to slide it out.

DRG buys the larger rolls of TP which wouldn’t fit in the quart can. I removed excess TP from the roll by sliding my finger between the sheets about a 1/2 inch from the outside and ripped it free of the roll. Squeeze what’s left of the roll together and stuff it into the quart can. Place the excess in a ziplock bag and toss it into your camping gear for the call of nature.

Step 2: Add Fuel

Pour the alcohol of your choosing in the TP stuffed quart can. My small plumber’s stove contained denatured alcohol over cotton and burns much cleaner than the 91% isopropyl.

WARNING: Do NOT use gasoline or other highly flammable petroleum-based fuels/accelerates! You’ll explode into flames if you do so.

The quart can held a little less than one 32 ounce bottle of alcohol. Allow the TP to absorb the fuel until completely saturated.

Step 3: Insert Quart Fuel Can

On Joshua’s Hobo Stove, his #3 tin can was tall enough for the flames to breathe oxygen. On my shorter quart fuel can, the flame would not stay lit inside the gallon can for more than a couple of minutes. To remedy my vertically challenged container, I elevated it a few inches by sitting it on a metal bowl I’d bought at a yard sale for a quarter. A large, empty tuna can would probably work too. As an added plus, you’ve got another useable container inside your stove.

Step 4: Ignition

Light the fuel can. Ferro rod sparks will ignite the fumes inside the can. If using a match or lighter, be careful to keep your hand to the side of the stove opening while lighting.

If you plan to use a Pathfinder Nesting Stove to hold cook pots, now is the time to place it on top of the gallon paint can. The flames from the fuel can will reach a foot or more in height.

A common man stove top can be made by adding coat hanger wire across the opening for pots to rest. Or cut a piece of sheet metal 4 inches wide with 1/2 inch notches on the top edge and securing it to the gallon can with a few hose clamps coupled together. You would lose the can’s bail handle but you’d have a functional stove top. The picture of my small plumber’s stove will give you an idea of how to make your own cook top.

My original Plumber's Stove burning 5

Step 5: Cook Stuff


As a test, I boiled about 62 ounces of water in my Pathfinder Bush Pot in 17 minutes inside my shop. Note: Use the plumber’s stove only in a properly ventilated area to avoid carbon monoxide poisoning.

I also tested the boil time with the same amount of water in my backyard bushcraft area with the same results. I thought lifting the Bush Pot about a half-inch over the stove top via my outdoor kitchen tripod would decrease the boil time. Still took about 17 minutes inside and outside.

Thanks again to Joshua for his tutorial that spurred me to make the Plumber’s Stove on Steroids! Overall, I’m very pleased. This stove would be useful as an alternative heating/cooking option when car camping, at deer camp, as a car emergency kit, or added to your emergency preparedness stocks at home.

Here’s our video of the stove in action:

Keep Doing the Stuff of Self-Reliance,


P.S. – You can also keep up with the Stuff we’re Doing on TwitterPinterestGoogle +, YouTube, Instagram, and Facebook… and over at the Doing the Stuff Network.

P.P.S – If you find value in our blog, Dirt Road Girl and I would appreciate your vote on Top Prepper Sites! You can vote daily by clicking here or on the image below. Check out all the other value-adding sites while you’re there… 

Thanks for Sharing the Stuff!

Copyright: Content on this site (unless the work of a third-party) may be shared freely in digital form, in part or whole, for non-commercial use with a link back to this site crediting the author. All links in articles must remain intact as originally posted in order to be republished. If you are interested a third-party article, please contact the author directly for republishing information.

Categories: Canning, DIY Preparedness Projects, Doing the Stuff, Preparedness, Self-reliance | Tags: , , , | 34 Comments

Blog at

%d bloggers like this: