by Todd Walker
Of all the primitive skills passed down from ancestral tribes, coaxing fire from two pieces of wood may be the most transforming. This one skill forever changed our existence in so many ways; diet, tools, security, defense, sleep, shelter, relationships, hygiene, ceremonies, etc., etc.
Fire is automatic today. Flip a switch and fire flows through insulated wiring to illuminate our home and power our refrigerator. Yet we don’t see this miracle in action as it hides inside walls. Our hands aren’t directly responsible for creating those sparks, and, as a result, we’ve become disconnected.
At the recent Foxfire Mountaineer Festival, lots of people gathered to see our Georgia Bushcraft group demonstrate primitive fire starting methods. With Alan Kay on the hand drill and myself on the bow drill, several onlookers were able to create their first fire by friction. Afterwards I was talking to Alan about the crowd’s interest in primitive fire making and he said…
“Nothing reconnects us to our roots like friction fire.”
I spent the better part of a month spinning wood between my hands before birthing my first ember. Along the way, blisters turned to calluses. To save you time and pain, I wanted to share my experience and a few tips which may help you twirl up your first ember.
Build a Hand Drill Set
Finding optimal material is key. In my experience in the humid south, even the best material can fail. Here are a few combinations local to Georgia which work for me.
- Trumpet Vine (Campsis radicans)
- Eastern Red Cedar (Juniperus virginiana) – use the whitish sap wood
- White Pine (Pinus strobus)
- Mimosa (Albizia julibrissin)
- Mullein (Verbascum) – tie two stalks together to form a hearth board
- Tulip Poplar (Liriodendron tulipifera)
The best hearth boards are non-resinous, soft wood. My go-to hearth board is trumpet vine. I had never considered this vine for friction fire until Dusty, a fellow Georgian, used it on his channel, IHatchetJack. I have a honey hole of this vine growing along a fence row near my school. Once dead, you can break off large sections from the vine.
For a traditional hearth board, the plank should be about one half-inch thick. It will need a notch carved into the “burn in” hole. I make my notches in a pyramid shape which reaches about one-quarter into the burned in hole. The notch allows the pulverized char dust to collect while the twirled spindle creates enough heat from friction to reach combustion temperature. The notch also allows air to reach the char dust (fuel) so that when enough heat is applied – the fire triangle is complete and an ember is born.
Non-traditional hearth boards can be effective as well. As mentioned on the bullet points above, two mullein stalks lashed together is an alternative when a flat board is not available. Instead of “burning in” a socket on a flat board, make a perpendicular cut on the two lashed sticks to keep your spindle in place while spinning. The trough between the sticks acts as a notch to collect the char dust.
My first hand drill ember was created on the friction end of my spindle… not in the notch of my hearth board. An ember is an ember, right? The idea of a no-notch hand drill ember was intriguing. I discovered that one can create a series of “burned in” holes where char dust is collected in the previous hole which serves as a traditionally notched board.
For first time hand drill experimentation, I would recommend a traditional set.
- Mullein (Verbascum)
- Goldenrod (Solidago)
- Cattail (Typha)
- Inserts in a river cane spindle: Cedar, tulip poplar, mimosa, basswood (Tilia americana) or any short, soft wood have worked for me
Productive locations to find mullein and yucca stalk spindles has been railroad tracks, road sides, cemeteries, and waste places. I like using the same wood for hearth and spindle. Good luck finding a straight piece of cedar long enough for a spindle. The river cane spindle is very forgiving. You can carve a short insert from a crooked limb to be used as your spindle material.
As far as the one-piece spindle goes, cut a straight section about the length of your outstretched arm about 3/8 inches in diameter. A longer spindle allows for more space to spin and provides more leverage for older guys like myself. If you’ve mastered the “float technique” like IHatchetJack, a shorter spindle is sufficient. That technique is more advanced but very efficient.
Scrape the spindle smooth with the spine of your knife or an abrasive stone. Once smooth, you’re ready to start spinning.
Technique, Stance, and Muscle
Some sit, some kneel. I’ve done both and find kneeling gives me more leverage for downward pressure on spins. My kneeling position is very similar to the stance I use for bow and drill fire starting.
My kneeling stance is described for right-handers. Reverse the directions if you’re a lefty.
Place the hearth board flat on the ground. Kneel down with your right knee on the ground and place your left foot on the board. Your right thigh should be near perpendicular to the ground and in line with your left foot. When spinning commences, the stance allows you to bend at the waist and use your upper body (shoulders) to apply the needed downward pressure and rotation of the spindle.
Keep your elbows in towards your body and hands close to your shoulders to maximize leverage with each spin down the spindle. Use the full length of your palms while twirling the spindle. The beefy part of your palm (inline with your pinky fingers) is where most of the work should happen. Both palms should move equally. If one palm is doing all the work, the top of your spindle will wobble back and forth.
A little spit on your hands will increase the grip between your palms. Another option is to rub pine pitch along the spindle shaft.
Fuel your muscles by breathing. Yup, I was guilty of concentrating so hard on spinning and pressure that I forgot to breath on my first attempt with the hand drill. Practice and patience will help you develop muscle memory and stamina whether you spin a coal or not. If you feel hot spots on your palm in the beginning, stop and wait a day before continuing. Blisters will put a stop to your practice.
Hand Drill Training Wheels
I learned the hand drill technique without thumb loops. However, I think they are a good way to get the feel for the amount of downward pressure and rotation involved with spinning a coal. Plus they allow you to have your hands in the same spot on the spindle without having to go up and down in the traditional manner.
Another way to increase success is to share the workload. Have a partner kneel in front of you and take turns twirling the spindle. Even if they only raise the temperature 200 degrees, that’s less work you’ll have to do. It’s also a great team-building experience when a group starts their campfire with many hands.
Make a Fire
Have the necessary tinder material handy so you can swaddle your baby ember and blow it into flame. Read more about tinder material and prep here.
Resources which helped me on my quest for hand drill success…
- IHatchetJack – Youtube channel
- ReallyBigMonkey1 – Youtube channel
- ReWildUniversity – Youtube channel
We’d really like to hear from you if this helps you create your first hand drill fire. For those already twirling up coals, feel free to share your tips and experience.
Keep Doing the Stuff of Self-Reliance,
P.S. – You can also keep up with the Stuff we’re Doing on Twitter, Pinterest, Google +, YouTube, Instagram, and Facebook… and over at our Doing the Stuff Network.
P.P.S – If you find value in our blog, Dirt Road Girl and I would appreciate your vote on Top Prepper Sites! You can vote daily by clicking here or on the image below. Check out all the other value-adding sites while you’re there…
Thanks for Sharing the Stuff!
Copyright © by Survival Sherpa: In light of the recent theft of all my content by a pirate site, my sharing policy has changed. I do not permit the re-posting of entire articles from my site without express written consent by me. My content on this site may be shared in digital form (200 words or less) for non-commercial use with a link back (without no-follow attribute) to the original article crediting the author. All photos, drawings, and articles are copyrighted by and the property of Survival Sherpa. You are more than welcome to share our photos and articles on social media for educational purposes as long as you link back to the original article/photo with credit to the author.
Pingback: Backyard Bushcraft Skills: No Wilderness Required | Survival Sherpa
Pingback: Campfires From Scratch: No Boy Scout Juice Required | Survival Sherpa
Pingback: Our First Year of Building Self-Reliance Skills at RISE Academy | Survival Sherpa